Cooler Tips & Services

In order to maintain the quality of your water, you will need to ensure that water dispensers are cleaned every four to six months.

• Prepare a disinfecting solution by adding one tablespoon of household bleach to a gallon of water or 4 oz of white vinegar to a quart of water. Never use soap, cleaning fluid, steel wool or other abrasive material to clean the unit.
• Make sure the water cooler is unplugged from the electrical outlet.
• Drain the water from both the hot and cold tanks until the water does not come out of the water cooler
• Remove the empty bottle from the dispenser.
• Use a soft sponge to scrub the interior surface of the water cooler reservoir with the cleaning solution and let stand for at least two minutes, but no more than five minutes.
• Drain the cleaning solution through both faucets into a bucket or other receptacle.
• Rinse the reservoir four times with clean tap or bottled water.
• Remove the drip tray and wash with a mild detergent. Rinse thoroughly.
• Wash hands before handling a fresh bottle of water.
• Clean the top of each new bottle before inserting on top of cooler.

It is recommended to get your cooler sanitized every 4 to 6 months to maintain the quality of your bottled water. See Sanitizing Tips on our Services Page, you can also contact us to schedule an appointment to have this service done at a minimal cost; the contact information for our Sanitization team is as follows:

Amorli Building Maintenance Services
#2 Orange Grove Estate
Trincity
P: 1-868-640-8824 Ext. 5051
E: abms@bluewaterstt.com

For Cooler Repairs:

P: 1-868-640-8824 Ext. 1226
E: Home&Office@bluewaterstt.com